I had been using the HEAD branch, but went back to the STABLE version just so I could use the drivers that I downloaded from Voicetronix.
Curiously, a majority of my issues were solved when I reversed the polarity on the incoming line. But I am now having an error appears indicating that it can't read the FSK caller ID signal. I have verified that there is indeed a caller ID squawk between the first and second rings, and I have told Asterisk to wait 6 seconds before answering. Additionally, I have "callerid = on" as a statement in vpb.conf. Here is the error: ERROR[1175660480]: chan_vpb.c:437 void get_callerid(vpb_pvt*): Failed to decode caller id on vpb/1-1 - VPBAPI_CID_NO_SIGNAL Any ideas? > > In case you haven't, did you download the latest drivers for > OpenLine4 from Voicetronix. We used their latest drivers and > patches for chan_vpb.c and have elinimated the DTMF being > dialed out too early and also improved sound quality when > multiple lines are in use. > > David > ----- Original Message ----- > From: "Greg Blakely" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, May 27, 2004 2:14 PM > Subject: [Asterisk-Users] Voicetronix OpenLine4 -- Help Needed > > > Hi. I need help with my brand new Voicetronix OpenLine4 board that I > installed into Asterisk. > > After building the Linux device driver and inserting the module, I > modified the /usr/src/asterisk/channels/chan_vpb.c file to > uncomment the > US settings and comment out the Austrailian ones. > > I made the appropriate entries for routing in vpb.conf and > extensions.conf.... All appears to be well, except that the > volume is > VERY low. > > On incoming calls, I can barely hear the call being answered by voice > mail. > > On outgoing calls, only some of the digits are being heard by the CO, > with the call eventually timing out. > > I've tried inserting "w" in front of the ${EXTEN} in extensions.conf, > but that doesn't do anything. > > I've tried "dialtone" instead of "fxo" for the mode in vpb.conf, but > that makes it unable to dial out at all. > > Can anyone help? > > (Config files posted below) > > ; ----- vpb.conf ---- > > > [general] > type = v4pci > cards = 1 > > [interfaces] > > board = 1 > echocancel = on > txgain = 12 > txhwgain=12 > txswgain=12 > ; > ; For OpenLine4 cards > context = fromvpb > mode = fxo > channel = 1 > channel = 2 > channel = 3 > channel = 4 > > ; =============================== > ; in extensions.conf > > exten => _NXXXXXX,1,Dial(vpb/1-1/${EXTEN}) > > (which should be correct, since I don't have a leading "9" or > "8" in my > dial plan. All I'm trying to do here is send 7-digit calls out over a > loop-start CO line.) > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users