> Dont use modprobe, use "capiinit start" Doing that :-)
> Get latest Firmware from: > ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/3-11-03/ Done that now. I've also put this link into the wiki. > > With some debugging statements I found out that it hangs right here > > in chan_capi.c: > > > > if (Listen(ALL_SERVICES) != 0) { > > ast_log(LOG_NOTICE,"unable to listen!\n"); > > return -1; > > } > > Unfortunately, it is still hanging. I traced it a little bit and it hangs in this loop after the //HS debug output: unsigned ListenOnController(unsigned long CIPmask,unsigned controller) { MESSAGE_EXCHANGE_ERROR error; _cmsg CMSG,CMSG2; LISTEN_REQ_HEADER(&CMSG, ast_capi_ApplID, ast_capi_MessageNumber++, controller); #ifdef NEVER_EVER_EARLY_B3_CONNECTS LISTEN_REQ_INFOMASK(&CMSG) = 0x00ff; // lots of info ;) #else LISTEN_REQ_INFOMASK(&CMSG) = 0x03ff; // lots of info ;) + early B3 connect #endif LISTEN_REQ_CIPMASK(&CMSG) = CIPmask; if ((error = _capi_put_cmsg(&CMSG)) != 0) { return error; } ast_log(LOG_NOTICE,"//HS\n"); while (!IS_LISTEN_CONF(&CMSG2)) { error = check_wait_get_cmsg(&CMSG2); } return 0; } If it is of any interest: the variable CIPmask is 0x1fff03ff. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
