Hi All, I'm running the latest asterisk CVS code (from experimental), and hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.3. The problem is that any inbound/outbound calls result in echo on MY end (the asterisk end). I've played with the echo settings in capi.conf (mainly turning on echocancel and echosquelch, also tried playing with rxgain/txgain) to no avail. The only setting that has helped (somewhat) so far is enabling echosquelch. The echo disappears but a new problem arises. When the person on the other end starts to talk, the first bit is chopped off, and the last bit (before they go quiet) so it almost sounds as though it's doing voice detection and transmitting only when it detects voice. Also, if the other person is talking and i start to talk, they get cut off immediately so this isn't a practical workaround.
Any help will be muchly appreciated. Regards, Gonzalo _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
