I have bristuff 0.0.2 running with an X100P card. I have the BRI
channels defined first, and then astly load my wcfxo (X100P) driver. If
you modprobe the wcfxo card last it works.
Here is my config:
loadzone=uk
defaultzone=uk
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,0,3,ccs,ami
bchan=4-5
dchan=6
fxsks=7
The loas sequence (when in ./bri-stuff-0.0.2/zaphfc) is
modprobe zaptel
insmod ./zaphfc.o (or ko if using a 2.6 kernel)
modprobe wcfxo
asterisk
the last modprobe also runs ztcfg.
Rgds
Tim
[EMAIL PROTECTED] wrote:
Hi
does anyone know if its possible to run Bristuff together
with a tdm card in the same computer.
I get an error when trying to start asterisk in chan_zap.c
My zaptel.conf looks like this:
loadzone=us
defaultzone=us
fxsks=1
fxoks=2
fxoks=3
span=1,1,3,ccs,ami
bchan=4-5
dchan=6
Thanks
Clive
_____________________________________________________________________
For super low premiums ,click here http://www.dialdirect.co.za/quote
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
