> > This is a problem I pointed out to Digium a while back, but I am not sure Markster understood the issue and I didn't really have the time to follow it up. It does need fixing though, as it is a major drawback in the current architecture. > > Rgds > Tim > > Hi all, > I have a box running asterisk with T410 connected to a Nortel DMS 100 switch and another box running SER with grandstream phones on it So if there is a call from the pstn it goes from the Nortel to the asterisk and then to the SER box and finally to the phones.if the phone is busy or the number is invalid the * box will first send an ALERT message to the Nortel and say the call is going on and the phone is ringing (which is not the case )and after it will send a RELEASE message saying that the line is busy or the # is invalid .is there any way * can send a progress message instead of the alerting message until it gets the correct message from SER? > > > Thanks > Habiyakare Aimable
Call Proceeding can be sent only by transit network, not by the local switch or pbx. AFAIK, * behavior for this scenario is like as local switch. Certainly, this is not a normal behavior. Regards, Gus _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users