g726 is 16,24,32 and 48k asterisk only does g726-32k. The iaxy doesn't do g726 it does ADPCM as g726 is too complex for the iaxy to do.
So in this case g711ulaw/alaw is all you have to choose from. bkw ----- Original Message ----- From: "Michael George" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 17, 2004 7:43 PM Subject: [Asterisk-Users] IAXy and bandwidth requirements > In the mailing list archives, I found a message that indicates that the > IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything > official on Digium's site about it. The Installation Manual has an > example iax.conf file that indicates the ulaw codec, so I know that one > is good. > > But we are thinking about using the IAXy over a VPN, to replace our > MultiVoip. alaw and ulaw are 64kbps, which is too much for our tunnel. > G726 would be good if is has decent sound quality at 16kbps. We > currently use MultiVoip's Netcoder at 9.6kbps which works fine. > > So, is there an official statement somewhere about which codecs the > IAXy supports? > > Thanks! > -Michael > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
