On Wed, 2004-06-23 at 05:01, Philipp von Klitzing wrote: --snip-- > > If I call from an Asterisk phone to an MX250 phone, I can talk FROM the > > MX250 phone TO the Asterisk phone, but not the other way around. In > > other words, the Asterisk phone will hear everything that is said from > > the MX250 phone, but if I say anything on the Asterisk phone the MX250 > > phone never gets it. > > Look at your codec configuration (disallow=all followed byallow= > statements). Do a "SIP DEBUG" on the Asterisk CLI to learn more about the > codec negotiation before/during a call. Finally check your phones VAD/ > silence suppression settings, make sure those are turned off.
That took care of it. I added a disallow=all followed by an allow=ulaw and it worked fine. What's strange is that I had manually set the codec on the phone earlier to use ulaw, but it didn't appear to want to listen. Forcing it via sip.conf took care of the problem. Thanks a lot for the help. -- Alex Malinovich Golden Technologies, Inc. (219) 462-7200 x 216 http://www.golden-tech.com
signature.asc
Description: This is a digitally signed message part
