Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the command line. The slots (3 fxs) are configured with 'ls' signaling. I configured the T1 card with the same line settings as the T1 interfaces on the adit and I get green lights on both the T1 card and the T1 interface on the adit (so they seem to be happy at that link level). I configured the T1 interface in the asterisk box to do 'fxsls' signaling on all 24 channels.
Couple questions: 1. Should I be getting dial tone on my punch down block yet? I can tell the handset it getting power when I touch it to the correct places on the punch down block, but no dial tone. Does asterisk need to be aware of these channels before dial tone will be heard? 2. Did I configure the digium card correctly? Does it need to be setup as fxo on the asterisk side and fxs on the channel bank side? Thank you. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
