Dial number from phone:
-- Executing Dial("SIP/206-2c61", "Zap/1/#######") in new stack
Currently on call:
-- Called 1/#######
Press flash to place call on hold with SPA-2000:
-- Hungup 'Zap/1-1'As soon as I press the "flash" button on my SPA-2000 connected phone, the zap channel hangs up and the call is disconnected. The same procedure works fine between SIP channels (flash to hold, or transfer). I'm hoping this is just a config problem and not a general defect, because it seems odd to me that I can't transfer calls when a zap channel is the other end of the call I want to transfer or place on hold.
sip.conf:
[206] type=friend username=206 secret=blah host=dynamic context=from-sip reinvite=no canreinvite=no disallow=all allow=ulaw nat=0
zapata.conf:
[channels] language=en signalling=fxs_ks usecallerid=no echotraining=800 echocancel=yes echocancelwhenbridged=yes rxgain=2.5 txgain=7.0 busydetect=yes busycount=8 faxdetect=incoming context=inbound-analog1 channel => 1 context=inbound-analog2 channel => 2
-- Seth "experientia docet" Mattinen [EMAIL PROTECTED]
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
