Hi David, which Telco/Carrier (type of public switch etc.) are you trying to connect Asterisk to? Also, is this a new circuit or an existing one that was previously working with other telephony hardware?
Regards Darren -- Comgate Telco>Internet<Broadcast -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of David Morillo Sent: 12 June 2004 16:57 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Sending SABME continuosly. Urgent help needed! Hi, I'm trying to install an E1 PRI, and I need it working by Monday, but although everything seems ok, I get no response to calls. When I make a pri extense debug on span 1, I repeatedly get the following: Sending Set Asynchronous Balanced Mode Extended [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 999 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended] 0 bytes of data. And nothing else. When making a call to that E1, I see the message "D-Channel on span 1 up" 4 times, and then a Informational frame, with TEI:000 EA:1 and anything else with zero (13 bytes of data). Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan:0 Chan Sel Reserved Ext: 1 Coding:0 Number Specified Channel Type: 3 Ext: 1 Spare: o Resetting Inidicated Channel (0) ] Then "D-Channel on span 1 downn", and finally, after a while: (...) Warning[11276]: chan_zap.c:5993 zt_pri_error: PRI: Read on 46 failed: Unknown error 500 (...) Notice[11276]: chan_zap.c:6708 pri_dchannel: PRI got event: 8 on span 1 I think I have Asterisk stable version 1.0, CVS updated today Can anyone help me? Please! :S Zaptel.conf -------------- span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone = es defaultzone=es Zapata.conf: -------------- [channels] language=es context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no jitterbuffers=4 group = 1 channel => 1-15,17-31 I have also tried with span=1,0,0,ccs,hdb3 immediate = yes The line has not CRC activated (I have asked) Thanks! _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users