> I replaced my X100P cards with two TDM04B fully populated (8 FXO > modules). They are working fine, I can make and receive calls, but I > noticed all modules are always in GREEN state, even if I disconnect the > line. Both zttools and a cat /proc/zaptel/<device> shows no RED alarm. > Is there a workaround for this?
There is no workaround. I opened a bug on this subject (well, the bug was oriented around * not knowing when a pstn line was down/disconnected and would continue to send calls out the zap port), and Mark closed it with comments something like... that's by design, will never be fixed. Not sure what the logic is behind that, but it certainly does _not_ emulate any typical pbx or switch that I've ever seen in 20+ years of telephony. The fxo module has all of the hardware logic to sense this (as well as many other things), but for whatever reason, no one wants to deal with implementing the software logic to support it. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users