Hello List, is someone operating a DID /P2P / Anlagenanschluss with more than one HFC-Based ISDN-Card ???
I have now 12 hours of setup-troubles behind me with Colt-Telekom, where we did not get it working with two HFC-based cards. Here the setup: - 2 HFC-ISDN-Cards (the one from Conrad-Electronic) - bri-stuff.0.0.2 (with the asterisk-sources from the download.sh-skript) - two NTBAs from Colt-TK with P2P Mode and a block of 30 DID-Numbers The Problem: - when both cards are connected to the NTBAs, and asterisk is started, the Ports in the VST from Colt drop. - when only one card is connected, the Port stays up. - I played with various timing setups... second span with timing=2, or timing=0, but in all cases, the Switch at Colt drops the line... (Layer2-failure they told me).... Has anybody a working setup, with two or more HFC-Cards ?? Can you please give me a hint, and which Telco-Carrier you use ?? TIA for all help regarding this..... Here the setup: zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 zapata.conf: switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes overlapdial=no immediate=no group = 3 context=vonaussenkommend channel => 1-2 switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes threewaycalling=yes overlapdial=no immediate=no group = 3 context=vonaussenkommend channel => 4-5 -- Bye Ernst --------- Ernst Lehmann Email: [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users