On Tue, 6 Jul 2004 11:58:58 -0500, Paul Concepcion <[EMAIL PROTECTED]> wrote: > > Loopback should always make your status LEDs glow steady green. If that's not > > working then you've got other problems. > > > > It seems I may have those "other problems" you talked about. I made a > loopback cable and tested it on the channel bank. After about three > seconds all the status lights went green. I plugged it into the T100P > with varying effects. I was grasping a little, and tried different > first lines of the /etc/zaptel.conf file: > span=1,0,0,esf,b8zs OR > span=1,1,0,esf,b8zs > > cycles between: > RED- YEL/RED - YEL/REC - Red/REC - OK. Eventually settles into RED.
Looks like you have a card problem a loop back to yhe T100P should go green in about 3 seconds like the channel bank. Regards Jason _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users