aha ,
yes i try to put x100p out from box and everything is ok :) but once again .. put together slowly all 3 cards (2xhfc + 1 x100p)
and get working 2 hfc cards and loading x100p without any errors!
less /proc/zaptel/3 Span 3: WCFXO/0 "Wildcard X101P Board 1" RED
7 WCFXO/0/0 FXSKS
but:
-- Executing Dial("SIP/101-f09f", "Zap/7/BYEXTENSION|130|t|r") in new stack
Jul 8 22:35:14 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy at this time
so anyone has maybe solution to this problem ? thankyou
[EMAIL PROTECTED] wrote:
hi
I had the saem trouble, so I just took my x100p card out and the problem went away:)
I know its not the ultimate solution, but I decided to use an ATA with my analgue phone instead.
I would suggest trying to put the analogue lines as channel 7 and the isdn lines as channels 1-6
Good luck regards Clive
On Thu, 08 Jul 2004 11:52:23 +0200
Tomaz <[EMAIL PROTECTED]> wrote:
-------------------------------------------------------------hello,
i have a problem starting asterisk with one x100p digium and two hfc chipset isdn cards with bri-stuff.0.0.2.
"ztcfg -vv" shows me a this info:
Zaptel Configuration ======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: D-channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: D-channel (Default) (Slaves: 07)
7 channels configured.
ZT_SPANCONFIG failed on span 1: Invalid argument (22)
cat /etc/zaptel.conf
loadzone=nl
defaultzone=nl
fxsks=1
########################
loadzone=nl defaultzone=nl
span=1,1,3,ccs,ami
bchan=2-3,5-6
dchan=4,7
and
# cat /etc/asterisk/zapata.conf
[channels] switchtype = euroisdn ; p2p TE mode signalling = bri_cpe ; prilocaldialplan=national pridialplan = unknown ; echocancel=yes group = 1 context=isdn channel => 2-3,5-6
group = 2 context=gsm signalling=fxs_ks channel => 1
--------------------------------------------- but when i start asterisk i got this errors:
Parsing '/etc/asterisk/zapata.conf': Found Jul 8 13:53:58 WARNING[16384]: chan_zap.c:682 zt_open: Unable to specify channel 2: No such device or address Jul 8 13:53:58 ERROR[16384]: chan_zap.c:5397 mkintf: Unable to open channel 2: No such device or address here = 0, tmp->channel = 2, channel = 2 Jul 8 13:53:58 ERROR[16384]: chan_zap.c:7668 setup_zap: Unable to register channel '2-3' Jul 8 13:53:58 WARNING[16384]: loader.c:313 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' -- Unregistered channel 1 Jul 8 13:53:58 WARNING[16384]: loader.c:408 load_modules: Loading module chan_zap.so failed! Segmentation fault
what to do? i have latest CVS asterisk .. thank you, Tomaz
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_____________________________________________________________________
For super low premiums ,click here http://www.dialdirect.co.za/quote
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users