Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO – PRI – ASTERISK – VODAVI(pbx).
Thanks, Dave
*CLI> -- Starting simple switch on 'Zap/69-1' -- Executing Wait("Zap/69-1", ".1") in new stack -- Executing DISA("Zap/69-1", "no-password|local") in new stack -- Starting simple switch on 'Zap/68-1' -- Executing Wait("Zap/68-1", ".1") in new stack -- Executing DISA("Zap/68-1", "no-password|local") in new stack Jul 8 20:44:20 WARNING[-1394406480]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/69-1' -- Executing Dial("Zap/69-1", "Zap/g2/6022831234") in new stack -- Called g2/6022831234 Jul 8 20:44:20 WARNING[-1416709200]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/68-1' -- Executing Dial("Zap/68-1", "Zap/g2/6022831234") in new stack -- Called g2/6022831234 -- Channel 0/2, span 2 got hangup -- Forcing restart of channel 0/2 on span 2 since channel reported in use -- Hungup 'Zap/26-1' == No one is available to answer at this time -- Executing Congestion("Zap/68-1", "") in new stack -- Channel 0/1, span 2 got hangup -- B-channel 0/2 successfully restarted on span 2 -- Hungup 'Zap/25-1' == No one is available to answer at this time -- Executing Congestion("Zap/69-1", "") in new stack == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/69-1' -- Hungup 'Zap/69-1' == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/68-1' -- Hungup 'Zap/68-1' |
- Re: [Asterisk-Users] Two outbound calls at once David Goldfein