Hi, I've just added an X101P FXO card to my asterisk machine. The card is detected ok but zttool always shows it in a RED alarm state, which I understand means that it doesn't detect the line.
I've connected the card via the line socket to my analogue line using the cable that came with the card (and have also tried other cables too) but I always get a RED alarm. I'm located in the UK, running FreeBSD-5.2, with zaptel-0.5 drivers and asterisk-0.9.0_1 (both built from ports). My zaptel.conf: fxsks=1 loadzone=uk defaultzone=uk My zapata.conf [channels] signalling=fxs_ks context=default channel => 1 Output of ztcfg -vv: Keyword: [fxsks], Value: [1] Keyword: [loadzone], Value: [uk] Keyword: [defaultzone], Value: [uk] Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. Asterisk sees the zap channel (or at least it shows up with 'zap show channels') but always sees it as busy, presumably because of the red alarm. The other thing of note is that when the zaptel driver is loaded, attempting to play MOH causes the entire system to lock up and require a reboot. (Without the driver loaded it works, but is of course choppy because of the lack of a timing source). Anyone have any ideas about what's going on? Richard. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users