As far as I know, if your switch doesn't support CDP, you need to configure the VLAN on the phone.
It's in Settings -> Network Configuration -> Option 22 "Admin VLAN Id". You will need to unlock the configuration first (method depends on the SIP firmware version you have). -Shaun On Tue, 13 Jul 2004 01:16:03 -0400, Kevin <[EMAIL PROTECTED]> wrote: > I noticed in the Cisco documentation that the access port( the port to > hook to a PC) on the 7960 can be configured via CDP with a layer3 Cisco > switch. > I also see where in the SIP configuration that you can specify the ADMIN > VAN. > > Does anyone know to configure the 7960 access port to use a different > VLAN using a non Cisco switch? > > Thanks, > > Kevin > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users