Turn off interrupt masking in your IDE driver: /sbin/hdparm -u1 /dev/hda
That solved the problem for me. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815 On Wed, 14 Jul 2004, Brian D'Arcy wrote: > Hello everyone, > > I'm using a TE410P, no irq sharing, and all extraneous devices disabled, > such as USB, Parallel etc. I'm getting a few IRQ misses according to > ZTTOOL. > > We're running a standard PRI_CPE interface and seem to be getting > dropped calls, and errors on the D-CHANNEL occasionally. The circuit > itself is very solid, it was in use on our old PBX just a few weeks ago, > never had any dropped calls, or any problems. I'm receiving the > following messages > > Jul 2 09:30:03 NOTICE[19475]: PRI got event: 4 on Primary D-channel of > span 1 > Jul 2 09:30:03 WARNING[19475]: No D-channels available! Using Primary > on channel anyway 24! > Jul 2 09:30:20 NOTICE[19475]: PRI got event: 5 on Primary D-channel of > span 1 > Jul 2 09:30:41 WARNING[19475]: PRI: !! Got a UA, but i'm in state 1 > > In between the D-Channel error notices/warings, I'll see channels 1-23 > goto yellow alarm state, then I'll see them clear. It does not seem to > coincide with the ~hourly reset of the b channels. > > I've looked everywhere for what these errors could mean, but I'm coming > up empty handed. > > Could these errors be related to the IRQ misses I'm seeing? I'm only > logging about 8 misses a day total. > > Zaptel and Zapata configs pasted below... > > [Zaptel.conf] > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > defaultzone=us > loadzone=us > > [Zapata.conf] > [channels] > context=inbound > switchtype=dms100 > overlapdial=yes > signalling=pri_cpe > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > transfer=yes > cancallforward=yes > callreturn=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > musiconhold=default > group = 1 > channel => 1-23 > > Any tips, tricks or debugging methods anyone could provide would be > extremely helpful! > > I'm running CVS-HEAD 7/2 for libpri, zaptel and asterisk, however the > problem has been occurring since we took the system live in mid-June. > > Thanks in advance to anyone who might can shed some light. > > Brian D'Arcy > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users