[Asterisk-Users] TE405P

[hskim]

I'm installing TE405P card. This is my zaptel.conf. -------------------------------------- span=1,0,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4   loadzone = us defaultzone= us --------------------------------------       When i modprobe wct4xxp, -------------------------------------- PCI: Found IRQ 11 for device 02:0b.0 PCI: Sharing IRQ 11 with 00:1d.7 Found TE410P at base address ed800000, remapped to e0951000 TE410P version c01a009b FALC version: 00000005, Board ID: 00 Reg 0: 0x1ad4b800 Reg 1: 0x1ad4b000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a009b Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx Registered tone zone 0 (United States / North America) TE410P: Span 1 configured for ESF/B8ZS TE410P: Span 2 configured for ESF/B8ZS SPAN 2: Primary Sync Source TE410P: Span 3 configured for ESF/B8ZS TE410P: Span 4 configured for ESF/B8ZS wct4xxp: Setting yellow alarm on span 1 wct4xxp: Setting yellow alarm on span 2 wct4xxp: Setting yellow alarm on span 3 wct4xxp: Setting yellow alarm on span 4 -------------------------------------- I have two questions.  - Is TE410P is same as TE405P, or did I received different card?  - zaptel.conf is configured CCS/HDB3. But It's configured as ESF/B8ZS.   Hong