I have a TDM400P with one FXO module and a FXS module. The main problem I have is not being able to get the extension attached to the FXS module to ring or be able to make calls. It gets a dialtone fine but I guess this doesnt really mean all that much.
If I dial the extension I just get a 404 error on the phone (Grandstream), but no errors at all on the console. I am using CVS-HEAD-07/14/04. Here is a snippet of what I have in the various config files.
zaptel.conf
loadzone=au defaultzone=au fxsks=1 fxoks=2
zapata.conf
[channels] context=incoming switchtype=national signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes txgain=0.0 rxgain=0.0 group=1 callgroup=1 pickupgroup=1-4 immediate=no busydetect=yes busycount=7
callerid=asreceived channel => 1 context=internal group=2
signalling=fxo_ks callerid="Fax" <310>
channel => 2
extensions.conf
[general] static=yes writeprotect=no
[globals]
[sip] exten => 301,1,Dial(SIP/Nick,20,tr) exten => 302,1,Dial(SIP/Sharon,20,tr) exten => 1000,1,Dial(SIP/Nick&SIP/Sharon,20,tr) exten => 302,2,VoiceMail,u302 exten => 301,2,VoiceMail,u301 exten => 1000,2,VoiceMail,u9999 exten => 1000,102,VoiceMail,b9999 exten => 1001,1,Ringing exten => 1001,2,Wait(2) exten => 1001,3,VoicemailMain include => outgoing
[incoming] exten => s,1,Dial(SIP/Nick&SIP/Sharon,20,tr)
[outgoing] exten => _7.,1,Dial(IAX2/login:[EMAIL PROTECTED]>XXX/${EXTEN:1}) exten => 5.,1,Dial,Zap/1/${EXTEN:1}
[9103] exten => 21060,1,Dial(SIP/Nick) exten => 21062,1,Dial(SIP/Sharon)
[internal] exten => 310,1,Dial,Zap/2
If I try to make any calls from the extension connected to the fxs module i just get what sounds like a busy tone. Looking at the console it generally give the error "zt_set_hook: zt hook failed Device or resource busy". It only gives this error when it goes off hook and number dialed.
Only other information I can provide is a couple errors when asterisk start up. I get the following:
"Unable to open /dev/dsp: No such device" "Unable to get our IP address, Skinny disable" "Ignoring switchtype"
Have not been able to dig out vast amounts of information on the above, but what I have found didnt seem to point to my problem, but then what do I know!
If anyone can help I would appreciate it! I'm going crazy here!
Kind regards Nick
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users