I've found an incorrect timezone in GS firmware: Tehran timezone is +3:30 not +3:00
> It gets definitely better every day. > > List of bug fixes follows: > > Release 1.0.5.9 7/26/2004 > If SIPRegister doesn't proceed due to conditions unmet, release > channel resource > Fix the LED flashing issue when connection to the SIP proxy is lost. > > Fix the issue where the device will not resume registration when it > loses connection to the outbound proxy for some time. > Fixed the registration interval overflow issue > Fixed the no-host-name in REGISTER message when configured using a > customer's Perl script > Fixed the bad To header in INVITE after receiving 302 response > Fixed the wrong URI in ACK to non-2xx response > Fixed the issue where 486 would lose registration when outbound > proxy is configured and when NAT traversal is turned ON with STUN server > field blank. > > Release 1.0.5.8 7/16/2004 > Fix the branch ID uniqueness issue of ACK to a 2xx response > Fix the CSeq not incrementing issue associated with sending > DTMF via SIP INFO when user is dialing fast and response to > SIP INFO is not received fast enough > Fix the bad To header field in our new INVITE request upon > receiving 302 response. > Fix the issue that we do not respond to SIP INFO request. > Do not play dial tone if registration is required and device > is not registered. > fix the inaccuracy of the timer unit value that causes > registration to expire about 2% faster than normal > fix the bug in parsing expire parameter and port when multiple > contact items are on the same line (in a same header field) > separated by comma. > Fix some accidental issues that break call forwarding and > call transfer > > Release 1.0.5.7 7/8/2004 > > Fix the issue where we only send ACK only once which causes > signaling failure if this ACK is not delivered (due to packet > loss, etc) to the callee. > Enable the high-pass filter and post-filter of G723. > Remove the unnecessary dial tone when a user presses *xx when local > call features are enabled > If a symmetric NAT is detected, still use mapped IP:port instead of > using private IP. > Allow access to 486's Web server using the WAN side IP from LAN port > Send ACK to the server in stead of per Contact header upon receiving > > 3xx response to an INVITE. > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users