Hello, I am planning to use my Quickent PhoneJack card with Asterisk. It appears to be the only way to use a Quicknet Card with SIP. Following some of the postings it should be possible. However I cannot get it to run.
I have installed the card successfully running Linux 2.6.6 with the native Linux driver using device /dev/phone0. Using gnomemeeting or ohphone I can place and receive H.323 calls fine, including a dialtone when I lift the analog phone. I have installed asterisk-1.0-RC1 using a simple make; make install; make samples and changed phone.conf: mode=dialtone format=g723.1 context=local device => /dev/phone0 extensions.conf CONSOLE=Phone/phone0 When I start asterisk and do a "show modules" I get: chan_phone.so Linux Telephony API Support 0 I believe the last number should be "1" ... I am not yet familiar enough with asterisk to set it pu my own. Can somebody with more experience direct me on how to get the Quickent card running with asterisk ? After a while of googling and reading I do not really know what to do ... Thank you, Fritz _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
