Well I turn on the pri intense debuging and the only message that I could find was this: [ 00 01 7f ] Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] 0 bytes of data Sending Set Asynchronous Balanced Mode Extended
Also Scott was right I was using the wrong setting , changes the zaptel.conf file with this span=1,1,0.ccs,hdb3 the /proc/zaptel/1 now shows this : Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS ClockSource But I can't still get the Zap channel to dial , any other thoughts? Thanks in advance Marcelo Rodriguez On Wed, 2004-08-04 at 09:58, Horacio J. PeÃa wrote: > > Well as you sugested I changed to ccs, hdb3 and nothing happen. Well the > > message on /proc/zaptel/1 changes to > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW > > ClockSource > > But at the end when I try to dial I still have the same errors > > > Any thoughts? > > I'm very new to asterisk, so take my words with a grain of salt. > > First, you should ask your provider what signalling type you should use (ami/hdb3, > cas/ccs, crc4/nocrc) Then configure that on zaptel.conf > > On asterisk, "pri intense debug span 1" will let you see anything that is > happening over the E1. > > > Saludos>! > > Saludos? Si hablas castellano no nos gastemos en usar ingles :-) > > > Aug 4 09:40:51 DEBUG[1217602880]: pbx.c:1255 pbx_extension_helper: > > Launching 'Dial' > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 1 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 2 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 3 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 4 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 5 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 6 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 7 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 8 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 9 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 10 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 11 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 12 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 13 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 14 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 15 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 17 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 18 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 19 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 20 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 21 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 22 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 23 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 24 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 25 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 26 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 27 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 28 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 29 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 30 > > Aug 4 09:40:51 DEBUG[1217602880]: chan_zap.c:6535 zt_request: Using > > channel 31 > > Aug 4 09:40:51 NOTICE[1217602880]: app_dial.c:714 dial_exec: Unable to > > create channel of type 'Zap' > > == Everyone is busy/congested at this time > > Aug 4 09:40:51 DEBUG[1217602880]: app_dial.c:974 dial_exec: Exiting > > with DIALSTATUS=CHANUNAVAIL. > > > > > > > > > > > > On Wed, 2004-08-04 at 09:28, Horacio J. PeÃa wrote: > > > > [zaptel.conf] > > > > span=1,1,0,cas,ami > > > > > > Are you sure that "cas,ami" is correct? I'm using "ccs,hdb3" > > > > > > Saludos, > > > HoraPe > > > --- > > > Horacio J. PeÃa > > > [EMAIL PROTECTED] > > > [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users