Robinson Tim-W10277: > We are using the HFC card in point-to-point mode with DDI. > > I am using bri-stuff-0.0.2 as well.
So, reading between the lines.... To enable DDI/DID/DOD, the card must be run under the ZAPHFC channel driver and therefore must be a HFC card? Can somebody confirm this? The reason I ask is that I installed a BRI system (Single Fritz! AVM card using chan_CAPI) last week which refused to work - turned out that British Telecom had provisioned the line as a point-to-point and not point-to-multipoint as requested. Accepting that BT were going to take several days to fix their cock-up, I tried to get the card to work in point-to-point mode, but failed miserably. I could really do with getting point-to-point working on these cards as they're cheap and in plentiful supply. Have I completely misunderstood the issue and am just being stoopid, or is it not possible to do this with these cards? Many thanks, Nick. PS If HFC is the best way to go, does anybody have any recommendations on cheap HFC card suppliers in the UK? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users