Hi Claus, your zaptel.conf looks to be good with primary and secondary timing coming from the PSTN.
Please can you check if your second E1 card has interrupt clashes with any other devices? (See: /proc/interrupts) Regards Darren -- Darren Storer Comgate Telco>Internet<Broadcast >-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Claus Futtrup Sent: 10 August 2004 10:03 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Problem with EuroISDN E1 Here you go. loadzone = no defaultzone = no span=1,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 dchan=16 span=2,2,0,ccs,hdb3,crc4 bchan=32-46 bchan=48-62 dchan=47 Both E100P are connected to PSTN. Kind Regards Claus Futtrup ----- Original Message ----- From: "Storer, Darren" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 10, 2004 10:53 AM Subject: RE: [Asterisk-Users] Problem with EuroISDN E1 > Hi Claus, > > CF> Could someone here please explain what these codes mean.. > CF> > CF> Aug 10 10:22:22 NOTICE[1146227632]: PRI got event: 6 on Primary > D-channel > CF> of span 2 > CF> Aug 10 10:25:22 NOTICE[1146227632]: PRI got event: 8 on Primary > D-channel > CF> of span 2 > > Event 6: Abort HDLC Frame > Event 8: Bad HCS > > I wonder if you have the correct timing set on your E1 spans? (Sounds like > clock slippage) Please post the contents of your /etc/zaptel.conf file to > the list. It would also be useful to know if one span is to the public > network (PSTN) and the other span is to a PBX or are both spans connected to > a PBX etc.? > > Regards > > Darren > -- > Darren Storer > Comgate > Telco>Internet<Broadcast > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Claus Futtrup > Sent: 10 August 2004 09:29 > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Problem with EuroISDN E1 > > > Hi there.. > > Could someone here please explain what these codes mean.. > > Aug 10 10:22:22 NOTICE[1146227632]: PRI got event: 6 on Primary D-channel of > span 2 > Aug 10 10:25:22 NOTICE[1146227632]: PRI got event: 8 on Primary D-channel of > span 2 > > I have two E100P installed in the machine, but the problem only seem to > affect span 2. Users have been complaining about being unable to make calls, > but Im not sure if this has anything to do with that.. > Please help. > > Kind Regards > > Claus Futtrup > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.735 / Virus Database: 489 - Release Date: 06-08-2004 > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.735 / Virus Database: 489 - Release Date: 06-08-2004 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users