Are you going to use single E1 line? How many concurrent calls.

Single Xeon 3.0 with *1 GB *ram should serve 30-32 calls with not problem, even during G729 transcoding and echo cancellation.
If you are not plaining to do G729 transcoding - then I believe you can put more then 32 calls in this box.



Having kept an Eye on hardware specs mails in the list, and having read the
hardware notes on voip-info, I am still confused over the recommended
hardware:

We are going to have up to 100 operators and staff making calls, mostly
through zap connected to TE405P through to a 32-channel E1. However, it is
possible that we may need another E1 - what is the rough ratio between
operators and calls when the call length on average is 3 minutes?)

I was thinking of adding some VOIP into the mix. So, what speed proc should
I use ? I am currently looking at:

A) Dual-Xeon 2.8 with 2 GB ram and 36 gb raid-1
B) Single Xeon 3.0 with 2 GB ram and 36 gb raid-1

So, assuming I stick with 1 E1 line, is a dual better than a single, or
should I take the savings from buying a single Xeon, and buy two machines
with two TE405p cards ?

Help!

Thanks.

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to