There is a way to ensure traffic prioritisation...but it can work out a little
expensive.
1. Use 3Com 4400 PWR as your switch.
2. Use 3Com NJ200/NJ220 (US) or NJ205/NJ225 (EU) POE Multiport switches
3. Use 3CNJVOIP-CPOD POE --> 7960 POE/Data splitters for power and data connections
to the phone.
The 4400 Delivers Power to the NJ2xx switches, these switches have 4 ports which can
be individually selected to handle traffic prioritisation on a per port basis.
The NJ2xx switches are fully managed supporting SNMP, Power forwarding and 802.1x
security....
This is how I've configured my LAN, and Phones get priority for network traffic.
Have fun
P
----- Original Message -----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: 13 Aug 04, 2:38 PM
Subject: [Asterisk-Users] Vlan question
Hi,
I am setting up an Asterisk system with Cisco 7960 phones. I have a PoE injector to
insert between the patch panel and HP 2626 switch. I plan to plug the users pc into
the phone and the phone into the wall. I would like the phones to have a seperate
subnet from the phones for performance reasons.
May be a silly question, but with the pc and phone sharing the same switch port, how
will it know to seperate the traffic and subnets?
Thanks
tm
ID:[{20040813172548.30403.1811044938-12.6.18.86}]
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
