Thanks!!! That works. A bit cumbersome but at least it works. Why does putting someone on hold and then taking them off again make the ATA (or *) recognize the # key as transfer?
Thankyou for your help On Sun, 15 Aug 2004 11:49:50 +0800, MPlus <[EMAIL PROTECTED]> wrote: > For blind transfers, press flash twice, then press #. > For consultative transfers, press flash once, talk to the other party and > tells him to hangup, press flash again, then press #. > > > > ----- Original Message ----- > From: "Dennis Cartier" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, August 15, 2004 2:10 AM > Subject: Re: Re: [Asterisk-Users] Re: GS HandyTone-286 Transfer Problem, can > anyone confirm? > > > Unfortunately the Cisco ATA-186 does not support iLBC which means > > extra costs for purchasing 729 licenses. The ATA-286 works fine other > > than this 1 issue. > > > > Do the Grandstream developers follow this list?? This problem has been > > persistent for a LONG time and each new firmware version still has it > > unfixed!! > > > > > > On Sat, 14 Aug 2004 19:36:43 +0300, Lubomir Christov > > <[EMAIL PROTECTED]> wrote: > > > > > > Yes, we are experiencing the same problem and because of that we > > > switched the called HT ata to Cisco ATA 186 ... > > > > > > Lubo > > > > > > > > > > > > Andy Lee wrote: > > > > [ Message pasted from Sun, 7 Mar 2004 08:27:54 -0600 ] > > > > > > > >>The problem I'm experiencing with many GS adapters, regardless of > > > >>firmware version is this. Call from one phone to another phone using > > > >>both the 'T' and 't' flags in the Dial() command. After they are > > > >>connected, you should be able to press '#' on either phone to hear > > > >>"transfer". What I am experiencing is the calling GS adapter will > > > >>hear "transfer" when they press '#', but when the receiving GS adapter > > > >>presses '#', nothing happens at all. Are you able to repeat this? If > > > >>not, can you please tell me the firmware revisions and Asterisk > > > >>version that you are using? > > > >> > > > >>Thank you very much. > > > > > > > > > > > > Yes, I am experiencing the same problem. Works fine with the > > > > BudgetTone phones but not with the HandyTone-286. > > > > > > > > Have you resolved this yet? We've been trying to figure this out on > > > > and off for the past couple of weeks. > > > > _______________________________________________ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > > -- > > > > > > --------- > > > Appradius Project: RADIUS authentication and accounting support for > > > Asterisk PBX > > > http://appradius.minitelecom.org/ > > > --------- > > > > > > > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users