On Wed, 2004-08-18 at 15:51, Kanwar Ranbir Sandhu wrote: > On Wed, 2004-08-18 at 15:38, Martin Keding wrote: > > I have a X100p and a TDM400P card in a Redhat 9 server. If Asterisk is > > not suhtdown properly (reboot without stopping Asterisk or power > > failure etc), I have to do a modprobe command after the restart before > > Asterisk works again. Any ideas how to resolve this. > > That's an easy one, and I am sure it's in the wiki or in the list, > somewhere. However if others are wondering, here's the solution: in > /etc/rc.modules, type in the modprobe command you use to manually load > the modules. That's it! > > Next time the server reboots, the rc.modules file will be read and the > modules will be automatically loaded. >
Or from the folder /usr/src/zaptel just do "make config" and it addes a service that will load all the needed modules. Also you can than do service zaptel restart etc. -- respectfully, Joseph =============== ---------------------= ********** = _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users