Good day ALL. Could anyone tell me is there a way to get fax debug output into the file when running safe_asterisk ? ------------------------------------------------------ V.8 capable Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter, V.29 and V.17 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm or 255mm Recording length: A4 (297mm) and B4 (364mm) Receiver's minimum scan line time: 5ms at 3.85 l/mm: T7.7 = T3.85 Error correction mode R8x15.4lines/mm OK Metric-based resolution preferred Minimum scan line time for higher resolutions: T15.4 = T7.7 DCS: Selected data signalling rate: V.29, 9600bps ----------------------------------------------------------------
The thing is that I'd like to make a web page where I'm uploading a file (it's being converted into tiff), creates a call file in /var/spool/asterisk/outgoing and send a fax. I have such call file: Channel: TRUNK/[EMAIL PROTECTED] Callerid: 103 Application: txfax Data: /tmp/fax2send.tiff But there is a problem with status of the fax transmit. When another end pickup a line and even no fax sent it hangups and * delete call file in the outgoing folder. -- Best regards Vlad _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
