I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later.
Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is attempting to register -- Device 'Matthew' successfuly registered Requesting capabilities RECEIVED UNKNOWN MESSAGE TYPE: 2b Received CapabilitiesRes RECEIVED UNKNOWN MESSAGE TYPE: 2b Buttontemplate requested Recieved SoftKey Template Request Received SoftKeySetReq Received LineStateReq RECEIVED UNKNOWN MESSAGE TYPE: 2d Received Time/Date Request And when I pick up the hand set: -- Starting simple switch on '[EMAIL PROTECTED]' No dialtone heard. 5 seconds later phone reboots. ------------------------------------------------------ Model: CP-7960G App Load ID: P00306000400 Boot Load ID: PC030301001 Asterisk CVS-HEAD-07/14/04-12:20:42 skinny.conf ------------------ [Matthew] device=SEP000F3442E4A7 version=P00306000400 nat=yes callerid="Matthew Boehm" <3044> transfer=1 callwaiting=1 threewaycalling=1 context=matthew linelabel=my line lable mailbox=100 line => 100 dtmfmode=rfc2833 Any help on this would be appreciated. Thanks, Matthew _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users