When I did the lspci -v when it got to the tdm400p it seemed to go into an infinite loop on this line:
Capabilities: [80] #00 [0000]. When I redirected output to a file it filled to 8MB in about 3 seconds with this line.
I moved the NIC so that it would be before the tdm400p, but it still did the same thing.


I haven't a clue what is going on here.

Any help is greatly appreciated.

Regards,
Greg

Here is the output:

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable)
Capabilities: [40] AGP version 2.0
Capabilities: [60] #08 [2001]


00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel


00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel


00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel


00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel


00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: Unknown device 17f2:3401
Flags: 66Mhz, fast devsel


00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
        Subsystem: Unknown device 17f2:3401
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Capabilities: [48] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
        Subsystem: Unknown device 17f2:3401
        Flags: 66Mhz, fast devsel, IRQ 12
        I/O ports at bc00
        Capabilities: [44] Power Management version 2

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at e4002000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2


00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9
Memory at e4003000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2


00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
Memory at e4004000 (32-bit, non-prefetchable)
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2


00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 12
I/O ports at c000
I/O ports at b000 [size=128]
Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2


00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e2000000-e3ffffff
Expansion ROM at 00009000 [disabled] [size=4K]


00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 17f2:3401
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2


00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Expansion ROM at 0000a000 [disabled] [size=4K]


01:07.0 Network controller: Individual Computers - Jens Schoenfeld Intel 537 (prog-if 80)
Subsystem: Unknown device b100:0001
Flags: bus master, medium devsel, latency 160, IRQ 10
I/O ports at 9000
Memory at e3009000 (32-bit, non-prefetchable) [size=4K]
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]
Capabilities: [80] #00 [0000]


On 27/08/2004, at 10:30 AM, Lyle Giese wrote:

lspci -v should show more helpfull info, including I/O memory addresses.

Lyle
----- Original Message -----
From: "Greg Hulands" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 26, 2004 7:11 PM
Subject: [Asterisk-Users] TDM400P Problems


Hi,
I have just started to setup and configure my asterisk box and am
having trouble with it. I have a dlink nic in the box as well as the
digium card. When the nic is in there by itself it works, but when I
put the tdm400p in, there seems to be some sort of conflict with the
network card. The tdm appears as another type of network card, which I
don't think it should, should it? It shows up in lspci as 01:08.0
Network controller: Individual Computers - Jens Schoenfeld Intel 537.

Does anyone know why this would be happening?

Any help is greatly appreciated.

Regards,
Greg

lspci with only network card in.

[EMAIL PROTECTED] root]# lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev
c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev
c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev
c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev
c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev
c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev
a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:0a.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine]
(rev 06)
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
[EMAIL PROTECTED] root]# cat /proc/interrupts
CPU0
0: 324262 XT-PIC timer
1: 76 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC NVidia nForce2
8: 1 XT-PIC rtc
9: 0 XT-PIC acpi, ehci_hcd
11: 1025 XT-PIC ohci_hcd, eth0
12: 26249 XT-PIC ohci_hcd, [EMAIL PROTECTED]:2:0:0
14: 14408 XT-PIC ide0
NMI: 0
ERR: 0
[EMAIL PROTECTED] root]#


lspci with network card and tdm400p in

[EMAIL PROTECTED] root]# lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev
c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev
c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev
c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev
c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev
c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev
a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:08.0 Network controller: Individual Computers - Jens Schoenfeld
Intel 537
01:0a.0 Ethernet controller: Unknown device 9106:3043 (rev 06)
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
[EMAIL PROTECTED] root]# cat /proc/interrupts
CPU0
0: 566133 XT-PIC timer
1: 141 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC ehci_hcd
8: 1 XT-PIC rtc
9: 2730 XT-PIC acpi, ohci_hcd
11: 46773 XT-PIC ohci_hcd, [EMAIL PROTECTED]:2:0:0
12: 0 XT-PIC NVidia nForce2
14: 16583 XT-PIC ide0
NMI: 0
ERR: 18


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to