Thanks Don for the help but I found someone with a similar problem and what they did was remove the audio module with a simple rmmod audio. Now i get dial tone and everything from my both both my x100p and my s100u. And can dial out from both.
Thanx again Dave > > ----- Original Message ----- > From: "David Luong" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, August 26, 2004 2:35 PM > Subject: [Asterisk-Users] Newbie needs help - Dev_Kit_Lite > installationproblem > > >> Installing DevkitLite hardware (Very similar to John Lange's post on Tue >> Oct 08 2002) >> >> I cannot get anything to work on the phone connected to the s100u. I >> dont >> know what to do. >> Can someone please help me? > > I too had the DevKitLite hardware. Had nothing but problems with it. Is > difficult to get running and when you do get it going, I think you will > find > that you may have trouble getting it to dial correctly. After getting it > running, I would pick up the phone to make a call and I would get a dial > tone but the S100U would not accept the DTMF tones for dialing. The only > thing I could do to correct this would be to down * and reboot the > computer. > Finally I stopped using it and bought a one port TDM400U. It works with > no > problems. >> >> I used the sample configuration files from digium documentaion that was >> supposed to be "sane" defaults for the kit. >> >> Very similar to John Lange's post on Tue Oct 08 2002 >> Here is my probelm: >> This is what i did. >> unplugged s100u >> rmmod wcfxo >> rmmod wcusb >> rmmod zaptel >> replugged s100u >> modprobe wcfxo >> modprobe wcusb >> ztcfg -vv >> asterisk -cv >> This is what I got: >> >> [EMAIL PROTECTED] root]# modprobe wcfxo >> ZT_CHANCONFIG failed on channel 2: No such device or address (6) >> /lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed >> /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed >> [EMAIL PROTECTED] root]# modprobe wcusb >> [EMAIL PROTECTED] root]# ztcfg -vv >> >> Zaptel Configuration >> ====================== >> >> >> Channel map: >> >> Channel 01: FXS Kewlstart (Default) (Slaves: 01) >> Channel 02: FXO Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> >> ZT_CHANCONFIG failed on channel 2: No such device or address (6) >> >> [EMAIL PROTECTED] root]# asterisk -cv >> Asterisk CVS-HEAD-08/24/04-09:05:32, Copyright (C) 1999-2004 Digium. >> Written by Mark Spencer <[EMAIL PROTECTED]> >> ========================================================================= >> Asterisk Event Logger Started /var/log/asterisk/event_log >> Asterisk PBX Core Initializing >> Registering builtin applications: >> [AbsoluteTimeout] >> [Answer] >> [BackGround] >> [Busy] >> [Congestion] >> [DigitTimeout] >> [Goto] >> [GotoIf] >> [GotoIfTime] >> [Hangup] >> [NoOp] >> [Prefix] >> [Progress] >> [ResetCDR] >> [ResponseTimeout] >> [Ringing] >> [SayNumber] >> [SayDigits] >> [SayAlpha] >> [SayPhonetic] >> [SetAccount] >> [SetAMAFlags] >> [SetGlobalVar] >> [SetLanguage] >> [SetVar] >> [StripMSD] >> [Suffix] >> [Wait] >> [WaitExten] >> Asterisk Dynamic Loader Starting: >> [chan_modem.so] => (Generic Voice Modem Driver) >> => (A/Open (Rockwell Chipset) ITU-2 VoiceModem Driver) >> [res_musiconhold.so] => (Music On Hold Resource) >> [res_adsi.so] => (ADSI Resource) >> [res_features.so] => (Call Parking Resource) >> [res_crypto.so] => (Cryptographic Digital Signatures) >> [res_indications.so] => (Indications Configuration) >> [res_monitor.so] => (Call Monitoring Resource) >> [res_agi.so] => (Asterisk Gateway Interface (AGI)) >> [chan_sip.so] -z: No such file or directory >> => (Session Initiation Protocol (SIP)) >> [chan_modem_bestdata.so] => (BestData (Conexant V.90 Chipset) >> VoiceModem >> Driver) >> [chan_modem_i4l.so] => (ISDN4Linux Emulated Modem Driver) >> [chan_agent.so] => (Agent Proxy Channel) >> [chan_mgcp.so] => (Media Gateway Control Protocol (MGCP)) >> [chan_iax2.so] => (Inter Asterisk eXchange (Ver 2)) >> [chan_local.so] => (Local Proxy Channel) >> [chan_skinny.so] => (Skinny Client Control Protocol (Skinny)) >> Aug 26 15:12:15 WARNING[1076220544]: chan_skinny.c:2584 reload_config: >> Unable to get our IP address, >> Skinny disabled >> [chan_oss.so] => (OSS Console Channel Driver) >> Aug 26 15:12:15 WARNING[1076220544]: chan_oss.c:992 load_module: XXX I >> don't work right with non-full duplex sound cards XXX >> Aug 26 15:12:15 WARNING[1097410752]: chan_oss.c:239 sound_thread: Read >> error on sound device: Resource temporarily unavailable >> [chan_phone.so] => (Linux Telephony API Support) >> [chan_zap.so] => (Zapata Telephony w/PRI) >> Aug 26 15:12:16 WARNING[1076220544]: chan_zap.c:721 zt_open: Unable to >> specify channel 2: Device or resource busy >> Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:5869 mkintf: Unable to >> open >> channel 2: Device or resource busy >> here = 0, tmp->channel = 2, channel = 2 >> Aug 26 15:12:16 ERROR[1076220544]: chan_zap.c:8776 setup_zap: Unable to >> register channel '2' >> Aug 26 15:12:16 WARNING[1076220544]: loader.c:328 ast_load_resource: >> chan_zap.so: load_module failed, returning -1 >> -- Unregistered channel 1 >> Aug 26 15:12:16 WARNING[1076220544]: loader.c:423 load_modules: Loading >> module chan_zap.so failed! >> >> A "ps" shows that asterisk didn't start. And there is still no dialtone >> from the phone on the s100u. I dont' know what to do. My x100p is >> plugged into a open pci slot with the phone line from the wall into the >> "wall" jack, and a normal cheapo storebought phone connected to the >> phone >> slot. I have my s100u plugged in and nother cheapo phone connected to >> that as well. >> I get a dialtone from my phone connected to my x100p with or without >> asterisk(I can call out and received calls like as if it was plugged >> straight into the wall and not through the x100p) >> I'm running Redhat9.0 on a P2 300Mhz emachine >> some more details: >> >> lsmod gives me: >> [EMAIL PROTECTED] root]# lsmod >> Module Size Used by Not tainted >> wcusb 20064 0 (unused) >> wcfxo 9376 0 (unused) >> zaptel 178080 0 [wcusb wcfxo] >> cs46xx 62832 0 (autoclean) >> ac97_codec 13640 0 (autoclean) [cs46xx] >> parport_pc 19076 1 (autoclean) >> lp 8996 0 (autoclean) >> parport 37056 1 (autoclean) [parport_pc lp] >> autofs 13268 0 (autoclean) (unused) >> tulip 43840 1 >> sg 36524 0 (autoclean) >> sr_mod 18136 0 (autoclean) >> ide-scsi 12208 0 >> scsi_mod 107160 3 [sg sr_mod ide-scsi] >> ide-cd 35708 0 >> cdrom 33728 0 [sr_mod ide-cd] >> audio 46648 0 (unused) >> soundcore 6404 4 [cs46xx audio] >> keybdev 2944 0 (unused) >> mousedev 5492 1 >> hid 22148 0 (unused) >> input 5856 0 [keybdev mousedev hid] >> usb-uhci 26348 0 (unused) >> usbcore 78784 1 [wcusb audio hid usb-uhci] >> ext3 70784 2 >> jbd 51892 2 [ext3] >> >> my /etc/zaptel.conf is as follows: >> >> fxsks=1 >> fxoks=2 >> loadzone = us >> defaultzone=us >> >> my /etc/asterisk/zapata.conf is(not including edited out lines): >> [channels] >> callwaiting=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> cancallforward=yes >> rxgain=0.0 >> txgain=0.0 >> group=1 >> immediate=no >> context=bell >> signalling=fxs_ks >> channel=1 >> context=home >> signalling=fxo_ks >> channel=2 >> >> I emailed [EMAIL PROTECTED] and they told me to switch chanel 1 and channel >> 2 >> in zaptel.conf. and to change the fxo_ks and fxs_ks in zapata.conf. >> and >> then doing the modprobes with wcusb first. also didn't work. And >> besides >> I read that it's better to have the x100p as channel 1 and the usb for >> channel 2. > > I agree that swapping the channels and the signalling should make it work. > It did for me. Remember to get your signalling for each channel the same > in > both zaptel.conf and zapata.conf the same. It will not work if they are > different. Also make sure the extensions.conf has the correct channels in > the extensions. Try rebooting your computer when you change this > information instead of rmmoding the modules and reloading. The rmmoding > did > not work for me, but rebooting did. > >> >> Anyways I thank anybody and everybody that took the time and even >> considered helping a Asterisk Newbie >> >> Dave >> >> >> >> _______________________________________________ >> Asterisk-Users mailing list >> [EMAIL PROTECTED] >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users