Yes, they told me so. When I turn it off I only get endless messages: ep 3 02:28:37 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16! == Primary D-Channel on span 1 up Sep 3 02:28:38 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16! == Primary D-Channel on span 1 up Sep 3 02:28:39 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
> -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] Im Auftrag von Michael Bielicki > Gesendet: Freitag, 3. September 2004 00:13 > An: Asterisk Users Mailing List - Non-Commercial Discussion > Betreff: Re: AW: [Asterisk-Users] WG: Digum TE410P > > Hmm I have seen that behaviour before. Are you sure hansenet uses crc4 ? > > On Fri, 2004-09-03 at 00:00, Henrik Pfluger wrote: > > Thanks, I made the changes, but that did not help?! > > > > This is what Asterisk is telling me when I try to dial out. Incoming > calls > > are not signaled at all. When our carrier resets the E1, the first > channel > > sometimes works for a short time: > > > > *CLI> -- B-channel 0/1 successfully restarted on span 1 > > -- B-channel 0/2 successfully restarted on span 1 > > -- B-channel 0/3 successfully restarted on span 1 > > -- B-channel 0/4 successfully restarted on span 1 > > -- B-channel 0/5 successfully restarted on span 1 > > -- B-channel 0/6 successfully restarted on span 1 > > -- B-channel 0/7 successfully restarted on span 1 > > -- B-channel 0/8 successfully restarted on span 1 > > -- B-channel 0/9 successfully restarted on span 1 > > -- B-channel 0/10 successfully restarted on span 1 > > -- B-channel 0/11 successfully restarted on span 1 > > -- B-channel 0/12 successfully restarted on span 1 > > -- B-channel 0/13 successfully restarted on span 1 > > -- B-channel 0/14 successfully restarted on span 1 > > -- B-channel 0/15 successfully restarted on span 1 > > -- B-channel 0/17 successfully restarted on span 1 > > -- B-channel 0/18 successfully restarted on span 1 > > -- B-channel 0/19 successfully restarted on span 1 > > -- B-channel 0/20 successfully restarted on span 1 > > -- B-channel 0/21 successfully restarted on span 1 > > -- B-channel 0/22 successfully restarted on span 1 > > -- B-channel 0/23 successfully restarted on span 1 > > -- B-channel 0/24 successfully restarted on span 1 > > -- B-channel 0/25 successfully restarted on span 1 > > -- B-channel 0/26 successfully restarted on span 1 > > -- B-channel 0/27 successfully restarted on span 1 > > -- B-channel 0/28 successfully restarted on span 1 > > -- B-channel 0/29 successfully restarted on span 1 > > -- B-channel 0/30 successfully restarted on span 1 > > -- B-channel 0/31 successfully restarted on span 1 > > -- Executing Dial("SIP/sipsnip.com-081b3798", "Zap/g1/c04044xxxxx") > in > > new stack > > -- Called g1/c04044506451 > > -- Channel 0/1, span 1 got hangup > > -- Forcing restart of channel 0/1 on span 1 since channel reported > in > > use > > -- Hungup 'Zap/1-1' > > == No one is available to answer at this time > > -- Executing Hangup("SIP/sipsnip.com-081b3798", "") in new stack > > == Spawn extension (default, 5555, 2) exited non-zero on > > 'SIP/sipsnip.com-081b3798' > > -- B-channel 0/1 successfully restarted on span 1 > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: [EMAIL PROTECTED] [mailto:asterisk-users- > > > [EMAIL PROTECTED] Im Auftrag von Michael Bielicki > > > Gesendet: Donnerstag, 2. September 2004 23:31 > > > An: Asterisk Users Mailing List - Non-Commercial Discussion > > > Betreff: Re: [Asterisk-Users] WG: Digum TE410P > > > > > > You cannot take the primary clock from all 4 channels. So you must > > > change your lines in zaptel.conf to: > > > > > > span=1,1,0,ccs,hdb3,crc4 > > > span=2,2,0,ccs,hdb3,crc4 > > > span=3,3,0,ccs,hdb3,crc4 > > > span=4,4,0,ccs,hdb3,crc4 > > > > > > also why specify the groups double ? > > > > > > switchtype = euroisdn > > > signalling = pri_cpe > > > group = 1 > > > channel => 1-15,17-31 > > > > > > cheers > > > > > > Michael > > > > > > > > > On Thu, 2004-09-02 at 23:16, Henrik Pfluger wrote: > > > > Hello, > > > > > > > > We recently installed a Wildcard TE410P, but we are having problems > to > > > make > > > > it work reliably with a German E1 (Primaermultiplexanschluss PMX > DSS1). > > > Our > > > > carrier (Hansenet in Hamburg, Germany) is using Nokia/Lucent > switches. > > > > The card is only able to set up the first B-channel (although it > tells > > > via > > > > Asterisk, that all B-Channels have been successfully started). When > > > > connecting a testing device to the E1 it is able to get all B- > channels. > > > When > > > > switching the cord to the TE410P the card keeps the B-channels, but > > > releases > > > > them after the first incoming call (this is what our carrier told > us). > > > > > > > > Sometimes it keeps a single channel long enough for us to make some > > > calls. > > > > > > > > Is anyone experiencing the same problem? Maybe our configuration > files > > > are > > > > incorrect? > > > > > > > > Can anyone help? > > > > > > > > Thank you, > > > > > > > > Henrik > > > > > > > > > > > > > > > > > > > > > > > > Zaptel.conf > > > > > > > > span=1,1,0,ccs,hdb3,crc4 > > > > bchan=1-15 > > > > dchan=16 > > > > bchan=17-31 > > > > span=2,1,0,ccs,hdb3,crc4 > > > > bchan=32-46 > > > > dchan=47 > > > > bchan=48-62 > > > > span=3,1,0,ccs,hdb3,crc4 > > > > bchan=63-77 > > > > dchan=78 > > > > bchan=79-93 > > > > span=4,1,0,ccs,hdb3,crc4 > > > > bchan=94-108 > > > > dchan=109 > > > > bchan=110-124 > > > > loadzone=de > > > > defaultzone=de > > > > > > > > > > > > Zapata.conf > > > > > > > > [channels] > > > > language=en > > > > context=default > > > > switchtype=euroisdn > > > > pridialplan=national > > > > signalling=pri_cpe > > > > usecallerid=yes > > > > hidecallerid=no > > > > callwaiting=yes > > > > usecallingpres=yes > > > > callwaitingcallerid=yes > > > > threewaycalling=yes > > > > transfer=yes > > > > cancallforward=yes > > > > callreturn=yes > > > > echocancel=yes > > > > echocancelwhenbridged=yes > > > > rxgain=0.0 > > > > txgain=0.0 > > > > group=1 > > > > callgroup=1 > > > > pickupgroup=1 > > > > immediate=no > > > > > > > > group = 1 > > > > channel => 1-15 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 1 > > > > channel => 17-31 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 2 > > > > channel => 32-46 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 2 > > > > channel => 48-62 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 3 > > > > channel => 63-77 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 3 > > > > channel => 79-93 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 4 > > > > channel => 94-108 > > > > > > > > switchtype = euroisdn > > > > signalling = pri_cpe > > > > group = 4 > > > > channel => 110-124 > > > > > > > > > > > > > > > > _______________________________________________ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
