That fixed it. Thanks > The 'parkedcalls' code dynamically creates and deletes entries in the > dialplan to handle the calls that have been parked, so the parking lot must > not overlap your regular extensions. The initial parking extension is > statically created on startup, thus the 'exten =>' entry is matching the > parking slot digits and throwing the congestion error - remove it or edit > /etc/asterisk/features.conf to move the parking lot. > > Either way, there is a fair amount missing from the extensions.conf you > posted. I suggest you troll through http://www.voip-info.org > > > -----Original Message----- > > From: PHP Mechanic [mailto:[EMAIL PROTECTED] > > Sent: September 10, 2004 7:27 AM > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: [Asterisk-Users] Call Parking Problem > > > > Hi, > > > > I'm unable to pick up parked calls after they are transfered. > > > > I get the "transfer" message when I press # and then I'm told > > "701" The > > extension I'm dialing goes to the on hold music. I'm > > disconnected, I hang > > up, dial "701" and I see this message on the console "Everyone is > > busy/congested at this time" > > > > I just have the default parkedcalls file, and have this in > > the extensions. > > > > [AnalogPhone] > > exten => _70X,1,Dial(Zap/1/${EXTEN},20,Ttr) > > include => parkedcalls > > > > [SipPhone] > > exten => _70X,1,Dial(SIP/1/${EXTEN},20,Ttr) > > include => parkedcalls > > > {clip} >
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
