Make sure you have the bios updated to recognise the card. If the hardware does not see it the OS wont either.
I just built Asterisk on an old single 450 PII Compaq Prolient 800 with an x100p and 3 ata186's. It works just fine.
Hope this helps.


--john

----- Original Message ----- From: "Rodolfo Grave" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]>
Sent: Sunday, September 12, 2004 6:50 AM
Subject: [Asterisk-Users] Problems installing x100p



Hi.

I have succesfuly installed asterisk and after I added a x100p card, but the system doesn't seem to know the card is there. This is what I've done:

compiled and installed zaptel, libpri and asterisk in that order using "make clean ; make install" commands. also, "make samples" for asterisk.

shutdown the PC and installed the x100p PCI card.

execute the following commands (I also include the output):

linux# ] modprobe zaptel
linux# ] modprobe wcfxs
/lib/modules/2.4.21-99-default/misc/wcfxs.o: init_module: No such device
/lib/modules/2.4.21-99-default/misc/wcfxs.o: insmod /lib/modules/2.4.21-99-default/misc/wcfxs.o failed
/lib/modules/2.4.21-99-default/misc/wcfxs.o: insmod wcfxs failed
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
linux# ] lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 22)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 09)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 02)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
00:0a.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet PCI Adapter
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0c.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b)


It seems that the PCI card is not detected... any ideas?

Thanks in advance.

RODOLFO




--- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0437-1, 09/09/2004 Tested on: 12/09/2004 13:50:10 avast! - copyright (c) 2000-2004 ALWIL Software. http://www.avast.com



_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to