On 13 Sep 2004, Murali wrote: [snip]
> the problem is when I type "zttool" command it shows > > RED Digium Wildcard T100P T1/PRI Card 0 > > my zaptel.conf look like this > > span=1,1,0,esf,b8zs [snip] > can any one suggest how to get ok signal. There are several possible error sources. What is your T1 connected to? If it isn't a pstn connection it may not provide a clock source. You may also need a T1 crossover cable (which is not the same as an ethernet crossover cable). Another possibility is that another line code than esf,b8zs is used. Peter _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users