I have cisco phones running
SCCP, and a cisco 2600 with FXO I’m using for PSTN access. I can dial out, but inbound
calls are not ringing a phone. Please see my config In the 2600 I’m
PLAR’ing the line and I have a SIP Dial-Peer for 4001 voice-port 1/1/0 output attenuation 0 echo-cancel coverage 32 no comfort-noise timing hookflash-out 50 connection plar opx 4001 dial-peer voice 2 voip description Route calls
starting with 4 to the Asterisk PBX destination-pattern 4... session protocol sipv2 session target
ipv4:10.0.50.150:5060 session transport udp dtmf-relay rtp-nte codec g711ulaw no vad In Asterisk I do get a SIP
READ on inbound call ------------------------------- Sip read: ACK
sip:[EMAIL PROTECTED]:5060 SIP/2.0 Via: SIP/2.0/UDP
10.0.50.1:5060 From:
<sip:10.0.50.1>;tag=C6D516C-2308 To:
<sip:[EMAIL PROTECTED]>;tag=as75c5e8e9 Date: Wed, 15 Sep 2004
14:30:22 GMT Call-ID:
[EMAIL PROTECTED] Max-Forwards: 6 Content-Length: 0 CSeq: 101 ACK -------------------------------------- But that’s all I get,
no phone ring.... The phone is SCCP.. and the
phones CAN call each other. Ideas? Justin............ |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users