Hello all,
We have been testing Asterisk RC2 with the native H323 channel driver. We followed the instructions with the needed OpenH323 and PWLib versions and everything compiled ok. Operation of the driver seems ok, except from 2 main points:
1) Audio is passed between the two ends of the call only after the call is answered. This was not the case with previous versions of Asterisk (0.9.2 for example), in which audio would begin before the call was answered. Early audio is useful i order to provide the calling user with remote end ringback as well as recorded announcements, etc.
2) The codec capabilities that Asterisk sends seem strange. No matter which codecs we set in the h323.conf file, G711 is the only codec that is sent in the capabilities. In order to use any other codec, we have to enable only the needed codec and disable all others. Again, this problem did not exist in older * versions, like 0.9.2 and it's limiting the capabilities of Asterisk in H323.
Has anyone dealt with this problem successfully?
Best regards,
-- Vlasis Hatzistavrou.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
