Hi
I have reason to believe that I have errors in my
configuration because when I make a call I can see the H323 call executed ok but
not being processed by Zap. I am using R2 signaling ( which I know is
incomplete but should I not see it when I debug Zap channel?). I think there is
a problem with my Zapata and zaptel configs . I understand that R2 can work with
R2 China and R2 Argentina. Currently am working with R2 Argentina. The E1 is ok
as when I configure a Cisco 5350 to work with it, it works
perfectly.
Here is my current configuration
zapata.conf
[channels]
context=default signalling=r2 r2country=ar group=1
callgroup=1 pickupgroup=1 transfer=yes
echocancel=yes callprogress=yes immediate=yes channel => 1-15,17-31
/etc/zaptel
span=1,0,0,cas,hdb3
cas=1-15:1001 cas=17-31:1001 Extentions.conf
[general]
static=yes writeprotect=no [globals]
CONSOLE=Console/dsp ; Console interface for demo IAXINFO=guest ; IAXtel username/password TRUNK=Zap/1 ; Trunk interface [local]
include => default [default]
exten => 203755343,1,Dial(Zap/g1/203755343) The error I get is
Sep 17 14:18:20 WARNING[1185515456]: pbx.c:1839
ast_pbx_run: Timeout, but no rule 't' in context 'default'
-- Executing Dial("H323/ip$80.247.147.146:3852/19860", "Zap/g1/203755343") in new stack -- Couldn't call g1/203755343 -- Hungup 'Zap/1-1' h323 --> Asterisk ---> h323 works ok
|
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users