Hi Matt, I have verified with ztmonitor the audio level and it was too low, then with this the fax machine report "Not Response". I modified the audio level in zapata.conf and after that the fax machine report "Commnunication Error".
Do you an idea what could be ? Thanks, Angel. > Message: 3 > Date: Sat, 18 Sep 2004 00:48:23 +1200 > From: [EMAIL PROTECTED] > Subject: Re:Re: [Asterisk-Users] Fax and Asterisk > To: Asterisk Users Mailing List - Non-Commercial Discussion > <[EMAIL PROTECTED]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=US-ASCII > > On 17 Sep 2004 at 8:29, Angel Diaz wrote: > > > Hi Matt Riddell > > Here you have the write permission for all > > > > "drwxrwxrwx 2 root root 4096 Sep 14 16:09 incoming" And > > about your question; How long does it time out for? It stay there > > without hang up until I switch off the fax machine. I have installed > > tiff-v3.6.0 and spandsp-0.0.1k.tar.gz and performed all steps > > described by Steve Underwood. Thanks, Angel. > > LOL the permissions shouldn't be a problem. > > >Redirecting Zap/1-1 to fax extension > > Isn't this line supposed to say detected fax, redirected to fax > extension? Are you doing anything weird in Extensions.conf? > > Also check the volume of the incoming audio by typing: > > /usr/src/zaptel/ztmonitor x -v > > (where x is the incoming channel i.e 1 or 2 or 3 etc) > > The bar should go pretty close to the right hand side of the line, > but shouldn't sit at the top. > > How's it look for you? > > Matt Riddell > (New Zealand Digium Distribution/Custom Software) > http://www.sineapps.com/contact.php (contact us) > http://www.sineapps.com/news.php (daily asterisk news) > > > > Message: 6 > > > Date: Fri, 17 Sep 2004 12:29:10 +1200 > > > From: [EMAIL PROTECTED] > > > Subject: Re: [Asterisk-Users] Fax and Asterisk > > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > > <[EMAIL PROTECTED]> > > > Message-ID: <[EMAIL PROTECTED]> > > > Content-Type: text/plain; charset=US-ASCII > > > > > > On 15 Sep 2004 at 15:10, Angel Diaz wrote: > > > > Hi all, > > > > I have problems with rxfax application. It seems to be ok but > > > > I don't receive the fax in my directory. > > > > My extension.conf is as follow: > > > > > > > -- SNIP -- > > > > And my log is : > > > > -- Executing Answer("Zap/1-1", "") in new stack > > > > -- Executing BackGround("Zap/1-1", "00") in new stack > > > > -- Playing '00' (language 'es') > > > > -- Redirecting Zap/1-1 to fax extension > > > > == Spawn extension (reception, fax, 0) exited non-zero on > > > > 'Zap/1-1' -- Executing Goto("Zap/1-1", "fax1|100|1") in new stack > > > > -- Goto (fax1,100,1) -- Executing Macro("Zap/1-1", "fax") in new > > > > stack -- Executing SetVar("Zap/1-1", > > > > "FAXFILE=/var/spool/asterisk/incoming/1095285200.16.tif") in new > > > > stack -- Executing RxFAX("Zap/1-1", > > > > "/var/spool/asterisk/incoming/1095285200.16.tif") in new stack > > > > > > > > and after that, it stay there without time out. Any suggestion ? > > > > > > It's probably receiving the fax. How long does it time out for? > > > Who can write to that directory (assuming you've created > > > /var/spool/asterisk/incoming/)? > > > > > > Cheers, > > > > > > Matt Riddell > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users