Thanks Mike, it did work after so much playing around. I guess none of those devices are coming with perfect installation and/or configuration instructions.
#Joseph On Sat, 2004-09-18 at 13:45, Mike Benoit wrote: > What I did was create an extension that goes to my "mainmenu", ie: > > exten => 7000,1,Goto(mainmenu,s,2) > > Then I setup the SPA-3000 to dial that extension when a call comes in > according to the FAQ entry on Sipura's website: > http://www.sipura.com/support/spa3000faq/Section_3.html#4 > > 4: How can I forward all PSTN callers to a VoIP number? > A: You can use specify a dial plan to be used by the default PSTN caller with > a hot line syntax: (S0<:voip_number>) where voip_number is replaced with > the actual phone number (or sip url) of the VoIP destination. > > So I used: (S0<:7000>) > > Works like a charm. > > In my experience Sipura has an excellent product, I use both the SPA- > 2000 and SPA-3000, and they are both great. > > I've had _far_ less problems with Sipura products then I have had with > Digium X100P cards. Especially when it comes to echo. Sipura's email > support is also exceptional, I often get replies to emails within > minutes, and they have even implemented feature requests and sent me a > beta firmware within days. > > > On Sat, 2004-09-18 at 13:31 -0600, Joseph wrote: > > On Fri, 2004-09-17 at 23:37, Kristian Kielhofner wrote: > > > Sys. Concept Inc. wrote: > > > > > > > How to Connect SPA-3000 to Asterisk so * will answer? > > > > After setting up Asterisk on Gentoo the extension.conf contains [demo] > > > > context; but my asterisk is not answering? > > > > > > > > In SPA-3000 in PSTN Line - tab under Dial Plan 1 I have: > > > > S0<:[EMAIL PROTECTED]> > > > > Default dial plan is set to 1. > > > > My box's IP where Asterisk is running has IP: 10.0.0.101 > > > > Line 1 - tab has: > > > > SIP Settings Port: 5060 > > > > Nat is disabled as both Asterisk and SPA-3000 are behind firewall. > > > > > > > > What am I missing? > > > > > > > > -- > > > > #Joseph > > > > > > Check this out from Voxilla: > > > > > > http://voxilla.com/forum-viewtopic-t-557.html > > > > > > > I checked their forum, actually Voxilla is the place I bought the > > SPA-3000 unit from. > > But the configuration instructions are not clear to me, there is a lot > > of information but none is complete. > > The SPA-3000 unit might be good but the configuration is nightmare and > > Sipura manual is only good for reference nothing else in addition they > > do not offer any support. > > If I was to recommend any unit, go with Digium cards and stay away from > > Siupra > > > > -- > > #Joseph > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users -- -- #Joseph _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users