debian sid with 2.6.8.1 kernel at last i was able to get spandsp compiled (see my last post) now i try to receive a fax but ...core dump!! :( here the output at console (nothing under /var/log/asterisk):
Changed from phase 0 to 1 Slow carrier up Slow carrier down Start receiving document Changed from phase 1 to 4 Sending ident >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Minimum scan line time for higher resolutions: T15.4 = T7.7 Get at 9600 Changed from phase 3 to 5 Fast carrier up Coarse carrier frequency 1712.90 (88) Fast carrier down Fast carrier up Coarse carrier frequency 1700.09 (66) Training error 7.764798 Training succeeded (constellation mismatch 6.026207) Fast carrier trained Fast carrier down Changed from phase 5 to 4 Start rx document - compression 2 Start rx page >>> CFR: 84 HDLC underflow in state 5 Post trainability Changed from phase 4 to 5 Fast carrier up Coarse carrier frequency 1699.83 (66) Training error 6.394423 Training succeeded (constellation mismatch 10.554763) Fast carrier trained Ouch ... error while writing audio data: : Broken pipe Segmentation fault (core dumped) Warning, flexibel rate not heavily tested! some guru can help? -- Maurizio Marini GSM +39-335-8259739 Work: +39-0721-855285 Fax +39-0721-859609 Home: +39-0721-950396 IAXTel: (700) 350-1234 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users