Graham Turner [EMAIL PROTECTED] lazily top-posted: > i have installed asterisk / zaptel from cvs distribution as of 17/09/04 > so i assume this does it > If you have a TDM/FXO then you'll need the latest CVS code. If you have a X100P then you'll need any CVS (the latest is usually a good choice) and some patches. I have the X100P running with today's CVS version and with UK (BT) Caller*ID support.
> > have configured zapata.conf as per instruction but i would have expected > to have seen the callerid on the asterisk console as it receives the call > but then may be not ?? > > the relevant my extensions.conf is ; > > exten => s,1,answer > exten => s,2,Dial(SIP/1001|10) > > it is quite possible that callerid is being seen by * but i would have > expected it to have been echoed to the console or at least written to the > CDR entries ??? > There's no need to answer before dialling, btw. The SIP phone's answer will filter through the system. Aside from that, the (UK) Caller*ID will only be available if you have one of the setups described above (TDM with latest CVS code or X100P with patches). > > going a bit further on, the whole point of this exercise is to allow this > CALLERID to be displayed on the console of a SIP peer (7940 ip phone) that > is defined as an asterisk extension > That will happen once you're set up, yes. -- _/ _/ _/_/_/_/ _/ _/ _/_/_/ _/ _/ _/_/_/ _/_/ _/ _/ _/ _/_/ _/ K e v i n W a l s h _/ _/ _/ _/ _/ _/ _/ _/_/ [EMAIL PROTECTED] _/ _/ _/_/_/_/ _/ _/_/_/ _/ _/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users