Hi,
I don't know much about the Wilcard TE410P but I surely know it won't work with a BRI Interface ... as you suppose it's only for PRI access.
For a BRI Interface you can find several solutions, the cheapest would be to simply use a BRI (ISDN) Card but there are also some more special cards with Quad- or Octo- BRI Connectors available, all depending on your demand.
For communication between * and your BRI cards you can use capi, misdn, i4l
or bristuff (zaphfc) drivers depending on your card. I would suggest to use a card
with a HFC - based chipset. These are cheap and work very well as far as I know.
You will find further information about it at http://www.voip-info.org and several other
websites.
bye
At 15:01 21.09.2004, you wrote:
Hi All,
Here at my office we have two basic ISDN Access with two phone lines each.
We would like to install an Asterisk PBX. The question is: How can I connect the ISDN lines to Asterisk?
Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 card is only for PRI access? Any other suggested and tested hardware for a production box?
Let me know,
-Z -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users