Unfortunately in my area call-by-call blocking caller id is not an option on ISDN PRI, I did do a small work around for phones that I wanted to block Caller ID from. I took one of my DID numbers and made the CSID that number, I had the LEC not send a name with that number. I did not define that DID in *, by not defining the DID in * it caused the LEC to send a reject to the calling party. Depending on what LEC the calling party was using they either got a busy signal or a recording saying that number is not valid.
Hope this helps -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Victor Sent: Tuesday, September 21, 2004 9:55 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Suppressing CallerID in .call files Henry Devito schrieb: > Most LEC's & CLEC's, at least in our area, require sending a number (CSID) > before the call is completed. This is do to E911 features and ANI. If you > do not send a number the call will fail. If you truly want to block caller > ID I would contact your carrier and they should be able to block it on their > level. Right - I discussed this with my PSTN carrier lately. Now the Problem is that I want to decide on a per call basis if I send a CallerID or not. Chris _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users