Hello all,
I'm trying to setup a AVM C2 card.
I have read the kernel requirements for this card.
<M> CAPI2.0 support
[*] Verbose reason code reporting (Kernel size +=7K)
[*] CAPI2.0 Middleware support (EXPERIMENTAL)
<M> CAPI2.0 /dev/capi support
[*] CAPI2.0 filesystem support
<M> CAPI2.0 capidrv interface support
My problem is when I make a "make menuconfig" in /usr/src/linux/, i can't see
any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian stable).
When I make a capiinit, to test the AVM card, it says,
debian-asterisk:~# capiinit
modprobe: Can't locate module capifs
modprobe: Can't locate module capifs
WARNING: filesystem capifs not available
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o failed
/lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod b1pci failed
ERROR: failed to load driver b1pci
ERROR: controller 1: firmware file "c4.bin" not found
ERROR: controller 2: firmware file "-" not found
ERROR: failed to load firmware for controller 1 driver c2 name c2-d400
ERROR: failed to load firmware for controller 2 driver c2 name c2-d400
As you can see, the first error is "can`t locate module capifs".
What i am doing wrong?
Any clue will be apreciated.
Regards
Ismael Gil
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
