I'm in the process of turning up a PRI in one of my markets and have run into a problem I have never seen before. I am unable to place a local outgoing call. Long Distance over the same PRI works fine.
When I attempt to place a local call using the PRI I see Asterisk attempt to dial, and am greeted with a busy signal. This signal appears to originate on the telco's switch. I have had a central office tech from the CLEC insert a monitor in the distribution point on the switch and observe call flow. According to the tech call flow appears proper, and he was able to tell me the number I was calling from and the number I attempted to dial. He then placed a PRI test-set at the distribution point in the switch and successfully made and terminated a variety of calls from that point. He then took the PRI test set out to my physical location and did the same test, made and received local and long distance calls on one of my trunks. After thinking about this last night I decided to re-update my Asterisk installation to the latest bleeding edge CVS version and re-test from my test extension with the exact same results. I successfully make long distance calls, successfully receive any calls, but the local calls originated from the SIP phone (SNOM200 and Mediatrix2102) fail with a busy signal that seems to originate from the CLEC's switch. Any suggestions? Thanks in advance. Paul _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users