> Incoming calls work and the phone rings and can be answered > no problems, (although I wouldn't mind being able to adjust > the ring but that's not important), I can't ring out, I just > get a busy signal and nothing comes up on the console. I am > pretty sure its just a simple line missing from extensions.conf.
In your [internal] context try something like.. exten => _0.,1,Answer exten => _0.,2,Dial(Zap/g1/${EXTEN:1}) exten => _0.,3,Hangup This way Asterisk will send all the digits dialled after the 0 to the zaptel card and you should be dialing out. You may not need the answer/hangup lines for your setup. > 2. > > I am based in australia and when I have an incoming call with > callerid turned on then I get the following error on console. > > -- Zap/1-1 is ringing > Sep 25 22:49:14 WARNING[-203428944]: chan_zap.c:3413 zt_handle_event: > Didn't finish Caller-ID spill. Cancelling. I'm not sure if this is related with inbound CallerID on an FXO, but to get Caller ID working on an FXS port I had to make this change to the chan_zap.c file and recompile:- http://lists.digium.com/pipermail/asterisk-users/2004-August/057349.html In /usr/src/asterisk/channels/chan_zap.c #define DEFAULT_CIDRINGS 2 The default is 1.. Seems we need this set to 2 in Australia, I dare say making this change might get the inbound caller ID working for you also. Hope this helps, Chris Lee _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users