Hi, Have some welltech devices myself, but after about one year of trials I decided to throw them out ... Even when you succeed in making it register it freezes after a random amount of time, no matter what SW u use on it.
Regards, Kiss Karoly On Sun, 26 Sep 2004, Danny Zak wrote: > Date: Sun, 26 Sep 2004 11:22:43 +0200 > From: Danny Zak <[EMAIL PROTECTED]> > To: Dinesh Nair <[EMAIL PROTECTED]> > Cc: Asterisk Users Mailing List - Non-Commercial Discussion > <[EMAIL PROTECTED]> > Subject: Re[2]: [Asterisk-Users] Asterisk <-> WellGate 3502a : ulaw/alaw > only? > > Hello Dinesh, > > my welltech does support g729 g723.1 and g711u and a. > > It works like a charm here. > > BUT; the registration problem still exists (even after using your rc) > > -- > Best regards, > Danny mailto:[EMAIL PROTECTED] > > belGOnet.com a Euro-pictures division - internet solutions > place princesse elisabeth 9/11 - 1030 Brussels - Belgium > Tel : +32-(0)2-215.67.65 - Fax : +32-(0)2-215.66.65 > > domains - hosting - hardware - VoiP - consultancy - backuping > CISCO - HP/COMPAQ - SUN - EMC - JUNIPER - IBM - DELL - NORTEL > > > No legal consequences can be derived from the contents of the email > neither is belGOnet.com committed to them. The content of this email > is exclusively intended for adressee(s) and information purposes. > belGOnet.com accepts no liability for any damage resulting from the > use and/or acceptation of the content of this email. > > > Sunday, September 26, 2004, 10:58:37 AM, you wrote: > > DN> On 26/09/2004 15:41 Vahan Yerkanian said the following: > >> I'm running latest * from CVS on FreeBSD 4.10 box. We've just bought > >> several WellGate 3502A FXSes to play with till welltech guys fix the > >> 3504a's registration bug. > > DN> welltech still hasn't responded to my complaint to them regarding their SIP > DN> registration process. in the interim however, i've patched asterisk 1.0 to > DN> handle this wellgate special case. i'll be emailling the patch over to you > DN> in a separate email. i run asterisk (0.9.0 and 1.0) on freebsd 4.10 too. > > >> alaw codecs work with *. If I add allow=gsm or allow=g723.1 in FXS's > >> ports entries in the sip.conf, no voice is heard from both sides after > >> the call is established. > > DN> i've seen the same. the wellgate's do not support the GSM codec and stock > DN> asterisk does not do g723.1. you'd need to only use ulaw or alaw for them. > DN> i've got this in my wellgate sip.conf entries: > > DN> disallow=all > DN> allow=ulaw > DN> allow=alaw > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users